• BeastX Microbeast Plus HD Pro Edition BXM76500PE

MICROBEAST Plus is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircrafts rotational movement with unprecedented precision and transmit the data digitally and in real time to the system. The housing made of plastic composite material keeps the weight of MICROBEAST Plus sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field.

Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST Plus can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Product Information

3 swash plate servos

Maximum adjustable servo update rate: 200Hz

Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing

1 rudder servo - Supports mostly all types of servos with 1520µs, 960µs or 760µs

Maximum adjustable servo update rate: 560Hz

When using a SingleLine receiver additionally: throttle output, auxiliary output for landing gear, position lights or else

Signal Inputs

Standard receiver with single servo output channels

SingleLine receivers: Spektrum DSM2/DSMX remote satellite, JR RJ01 DMSS remote satellite, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM

Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

High power input

Well proven electronic switch system

Allows to connect power wires with large diameter between receiver battery/BEC and flybarless system

Specifications

MICROBEAST Plus HD PRO x 1

Switch Harness x 1

Power Cable x 1

Receiver connection cables x 3

3M adhesive pads x 2

Adjustment tool x 1

Quick start manual poster x 1

Plastic quick reference card x  1

Sticker set x 1

Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)

Processor: 32 Bit ARM

Sensor: 6-Axis MEMS (Gyro + Accelerometer)

Dimensions: 36 x 25 x 14 mm

Weight (w/o wiring): ca. 11g

Write a review

Please login or register to review

BeastX Microbeast Plus HD Pro Edition BXM76500PE

  • Brand Beastx
  • Product Code: 02-BXM76500PE
  • Availability: In Stock
  • $299.99


Related Products

Tags: Beastx


Powered by Our Customers PowerHeliShop © 2021