Align T-REX 450L Dominator Almost Ready to Fly ARTF includes A10 2.4GHz Transmitter.
Align T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to new RC helicopter enthusiasts, Align introduced T-REX 450LP Almost Ready to FlyARTF (Almost Ready to Fly)*, complete with newly released Align A10 transmitter and Mini GRS flybarless system. This combination allows new enthusiasts to spend more time flying, rather than countless hours of guess work and building.
The helicopter utilizes DFC (Direct Flight Control) rotor head, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. It provides excellent stability suitable for pilots of all levees.
Equipped with digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with the new RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.
ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multicopter. Logical and simple control interface, and easy to set up.
With the addition of the brand new Align A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both on stability and 3D performance, while maintaining a down to earth price level.
460MX Brushless motor (3200KV/2222)
DS450 Digital Servos x 3
DS455 Digital Servo
MiniGRS Flybarless System
Balance Charger RCC-3SX
3S1P 11.1V 2200mAh/30C Battery
DS455 Digital Servo
T-REX 450L Specification
Main Blade Lenght: 325mm
Main Rotor Diameter: 734mm
Tail Rotor Diameter: 171mm
Motor Drive Gear: 11T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 26T
Drive Gear Ratio: 11:1:4.07
Weight (without battery): 730g
Operating voltage range: DC 3.5~8.4V
Operating current consumption: <100mA @ 4.8V
Rotational detection rate: ±300°/sec
Rudder yaw detection rate: ±600°/sec
Sensor resolution: 12 BIT
Swashplate Support: 120° CCPM Swashplate
Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
Operating temperature: -20? ~ 65?
Operating humidity: 0% ~ 95%
Comply with RoHS
Size: 37.6mm x 22.4mm x 13mm
*User is required to install tail assembly to the body of the helicopter and reconfirm set-up before flight.
Available Models: Helicopter/Airplane/Multicopter
Frequency range: 2.4055 ~ 2.475 GHz
Power: no higher than 20dBm
System Mode: 2.4G system AFHDS 2A
Suitable Voltage Range: 4.0 ~ 6.0V DC
Receiving Distance: open ground no interference < 1000M
Low Voltage Warning: Lower than 4.2V
Weight: 487g (excludes battery)
Balance Charger RCC-3SX Specification
Input Voltage: AC 100V~240V(50/60Hz)
Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
Supported Battery Type: Li-polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Size: 123mm x 74.3mm x 32mm
Output: 11.1V 2200mAh 24.4Wh (3S1P)
Supports 5C charging
Dimension: 104mm x 36mm x 22mm
Equipment Required for Assembly
Transmitter (6-channel or more, helicopter system)
Receiver S.bus, DMSX/DMS2 , Receiver (6-channel or more)
3S1P 11.1V 1300mAh 30C
Digital Pitch Gauge
Misc. Building Equipment
Align T-REX 450LP Dominator Almost Ready to Fly with A10 ARTF RH45E32X
- Brand: Align
- Product Code: 01-RH45E32X
- Availability: In Stock
- SKU: RH45E32X